A professional alternative to removing the DPF from the vehicle
A blocked Diesel Particulate Filter (DPF) can quickly become an expensive problem for vehicle owners—and a time-consuming job for mechanics.
When excessive soot builds up inside the DPF, the vehicle may suffer from reduced performance, increased back pressure, failed regeneration, warning lights, and limp-home mode.
The traditional approach has often been to remove the DPF from the vehicle and send it away for specialist cleaning.
But does the DPF always need to be removed?
In many cases, there is another option worth considering first.
The Errecom Pro-Users DPF Flush Kit has been specifically developed to allow professional technicians to deep-clean a diesel particulate filter while it remains installed on the vehicle.
For garages, this can mean less dismantling, less labour and potentially much faster vehicle turnaround.
Why remove the DPF if you don't have to?
Removing a DPF can be a substantial workshop job.
Depending on the vehicle, the DPF may be difficult to access, and exhaust components may have been exposed to years of heat, corrosion, and road contamination.
Fasteners can seize. Sensors can be difficult to remove. Exhaust connections may require considerable time and effort to dismantle.
Once the DPF has been removed, it may then need to be transported or sent to a specialist cleaning company before being returned to the workshop for refitting.
For the mechanic, this means:
- More dismantling
- More labour
- More opportunity for seized or damaged components
- Longer vehicle downtime
- Additional handling and transport
- More time before the vehicle can be returned to the customer
The Errecom DPF Flush Kit provides an alternative: clean the DPF while it is still on the vehicle.
How the Errecom DPF Flush Kit works
The Errecom system uses a dedicated DPF flush gun to introduce the cleaning chemicals under pressure directly into the DPF.
The system includes:
- 5 litres of DPF Flush
- 5 litres of DPF Rinse
- DPF Flush Gun
- Rigid and flexible interchangeable probes
- Compressed-air connection with 1/4" ball valve
- Chemical-resistant FKM gaskets
- Chemical-resistant Rilsan PA11 hose
The DPF flush formulation is designed to penetrate deep into the honeycomb structure of the filter and help remove accumulated carbon and soot residues. (Chemical Tools)
After the cleaning stage, DPF Rinse is used to rinse the filter.
The system is supplied with detailed instructions, making it practical for professional workshop use. (Chemical Tools)
What makes the Errecom system different?
The key advantage is that the cleaning chemicals are applied directly into the DPF while it remains installed on the vehicle.
This avoids automatically committing the workshop to the time-consuming process of removing the filter.
According to Errecom's product information, approximately one litre is normally sufficient for one complete treatment, although technicians should follow the supplied instructions and assess the individual vehicle and condition of the DPF. (Chemical Tools)
The chemical treatment is designed to help reduce soot loading and restore normal exhaust back pressure, assisting the subsequent regeneration process. (Chemical Tools)
Why is a blocked DPF a problem?
The DPF's job is to capture particulate matter from the diesel exhaust.
Under normal operating conditions, accumulated soot is periodically burned during regeneration.
However, regeneration requires sufficiently high exhaust temperatures.
Short journeys, low-speed driving, and repeated interrupted regeneration cycles can prevent the DPF from achieving effective regeneration.
As soot accumulates, exhaust back pressure increases.
If the problem continues, the vehicle can eventually enter a restricted operating mode.
At this stage, simply taking the vehicle for another long drive may no longer be sufficient.
Chemical cleaning can help lower the soot combustion temperature.
Errecom states that its DPF chemical technology is designed to lower the temperature at which accumulated soot can oxidise.
The product information describes normal soot oxidation temperatures as approximately 550°C–650°C, while the chemical treatment is intended to facilitate oxidation at substantially lower temperatures. (Chemical Tools)
This can make it easier for the vehicle to complete the subsequent regeneration process.
The objective isn't simply to wash the DPF—it is to chemically treat the accumulated soot so that it can be removed more effectively.
The workshop benefits
1. Avoid unnecessary DPF removal.
Perhaps the biggest advantage is also the simplest.
You don't necessarily have to remove the DPF to clean it.
Where the vehicle and DPF are suitable for in situ treatment, the mechanic can carry out the cleaning process with the filter remaining in position.
2. Save workshop labour
Removing and refitting a DPF can consume significant workshop time.
An in situ cleaning procedure can eliminate much of that dismantling and refitting work.
That can make the repair more efficient and potentially more profitable.
3. Reduce vehicle downtime
A vehicle doesn't need to wait while its DPF is removed and sent elsewhere for cleaning.
For customers who rely on their vehicle for work, this can be particularly valuable.
For vans and commercial vehicles, getting the vehicle back into service quickly can be critical.
4. Reduce the risk of seized components
DPFs and exhaust components operate in an extremely harsh environment.
Years of heat and corrosion can make exhaust fasteners and sensors difficult to remove.
Every time a mechanic dismantles an exhaust system, there is a possibility of encountering a seized component or creating additional work.
Avoiding unnecessary removal can reduce that risk.
5. Provide an alternative to expensive replacement.
A blocked DPF doesn't automatically mean the filter needs replacing.
If the DPF is physically sound and suitable for cleaning, professional cleaning can potentially restore its function without fitting an expensive replacement unit.
However, a DPF that is cracked, melted, or otherwise physically damaged may require replacement.
DPF cleaning isn't a substitute for diagnosis.
This is an important point for every professional workshop.
Cleaning the DPF is only part of the repair.
If the underlying cause of excessive soot production isn't identified, the DPF may simply become blocked again.
Before and after cleaning, the mechanic should consider checking:
- DPF differential pressure
- DPF pressure sensor
- Exhaust temperature sensors
- EGR operation
- Injector performance
- Turbocharger operation
- Airflow
- Engine fault codes
- Regeneration history
- Engine oil specification and condition
The mechanic should also establish whether the DPF problem is primarily related to soot loading, ash accumulation, or physical damage.
The correct cleaning method will depend on the vehicle and condition of the filter.
In-situ cleaning versus removing the DPF
| Errecom in-situ cleaning | Remove & clean off the vehicle. | |
| DPF removal | No | Yes. |
| Workshop dismantling | Reduced | Greater |
| Labour requirement | Potentially lower | Potentially higher |
| Vehicle downtime | Potentially shorter | Potentially longer |
| Seized exhaust components | Less likely to be disturbed | Components must be removed. |
| Transport to specialist cleaner | Not normally required | May be required |
| Suitable for physically damaged DPF | No | Usually replacement/repair is required. |
| Professional cleaning option | Yes. | Yes. |
The choice should always be based on proper diagnosis.
The important point for the workshop is that DPF removal doesn't have to be the automatic first step.
What's included in the Errecom Pro-Users DPF Flush Kit?
The professional kit supplied by Chemtools includes:
DPF Flush Gun
The dedicated application tool for introducing the cleaning solution into the DPF under pressure.
It features interchangeable rigid and flexible probes, allowing the technician to select the appropriate application method.
5L DPF Flush
A dedicated, non-flammable DPF cleaning liquid designed to penetrate the honeycomb structure and treat carbon and soot residues.
5L DPF Rinse
A dedicated non-flammable rinsing liquid used after the cleaning stage.
Professional workshop equipment
The flush gun incorporates chemical-resistant components, including FKM gaskets and Rilsan PA11 hose, designed to withstand aggressive liquids. (Chemical Tools)
A useful addition to the professional workshop
For garages working regularly on modern diesel vehicles, an in-situ DPF cleaning system can provide another option when dealing with DPF restriction problems.
Rather than automatically removing the filter, the mechanic can first diagnose the problem and determine whether the DPF is suitable for in-situ treatment.
If it is, the Errecom system can potentially:
Save labour → reduce downtime → reduce customer cost → avoid unnecessary DPF removal.
Before you remove the DPF, consider flushing it in situ.
DPF removal and specialist off-vehicle cleaning still have an important place in professional DPF servicing.
But it shouldn't necessarily be the first option for every blocked filter.
If the DPF is serviceable and the problem is excessive soot or contamination, in-situ chemical cleaning may offer a faster and more economical solution.
The Errecom Pro-Users DPF Flush Kit gives mechanics the equipment to carry out this process professionally, using a dedicated flush gun, 5 litres of DPF Flush, and 5 litres of DPF Rinse. (Chemical Tools)
Save time. Avoid unnecessary removal. Get the vehicle back on the road.
Shop the Errecom Pro-Users DPF Flush Kit at Chemtools.
Errecom Pro-Users DPF Flush Kit — Chemtools
£149.58 + VAT
The kit is supplied with the professional DPF flush gun, 5L DPF flush, and 5L DPF rinse. (Chemical Tools)
Frequently Asked Questions
Can you clean a DPF without removing it?
Yes. Where the vehicle and DPF are suitable, an in-situ chemical cleaning procedure can be carried out using the Errecom DPF Flush system. The cleaning solution is applied under pressure directly into the DPF while it remains installed on the vehicle. (Chemical Tools)
Does DPF cleaning always work?
No cleaning method can guarantee that every DPF can be restored. The filter should first be diagnosed to establish its condition and the cause of the blockage. A physically damaged or melted DPF may require replacement.
Is DPF cleaning cheaper than replacement?
It can be. Where a serviceable DPF can be successfully cleaned rather than replaced, the potential saving can be significant. In-situ cleaning can also reduce the labour associated with removing and refitting the filter.
How much DPF flush is required?
Errecom states that approximately one litre is normally sufficient for one complete treatment, although the technician should follow the manufacturer's instructions and assess the individual vehicle. (Chemical Tools)
What is the DPF rinse used for?
DPF Rinse is the dedicated rinsing liquid supplied for use after the DPF Flush cleaning stage. (Chemical Tools)
Is the Errecom DPF Flush Kit suitable for professional garages?
Yes. The Pro-Users kit includes a dedicated flush gun with interchangeable probes and chemical-resistant components, together with 5L containers of DPF Flush and DPF Rinse. (Chemical Tools)
Should I remove a blocked DPF or clean it in situ?
The correct approach depends on the vehicle, the condition of the DPF, and the cause of the restriction. Where the DPF is physically sound and suitable for chemical treatment, in-situ cleaning can be an attractive alternative to removal.





